SN74AHCT126PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DUMMY VAL |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT126 |
| Pin Count | 14 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 7.5 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 8.5 ns |
| Control Type | ENABLE HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT126PW Overview
Logical driver uses a neat 14-TSSOP (0.173, 4.40mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74AHCT series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Electronic parts from the AHCT/VHCT/VT family are used in this part. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74AHCT126" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE HIGH control technology. In quiescent state, the electronic part uses 2μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features DUMMY VAL to better serve the need. 4 channels for high quality communication. It is sufficient to make 4 outputs.
SN74AHCT126PW Features
Bus Driver/Transceivers
DUMMY VAL
SN74AHCT126PW Applications
There are a lot of Texas Instruments SN74AHCT126PW Buffers & Transceivers applications.
- Low power, low voltage systems
- Wireless showroom
- IP cameras
- Bar, KTV wireless entertainment
- Lamps
- VoIP phones
- Automation systems
- Digital systems
- Precision engineering measurement
- Car alarm systems
