Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74AHCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Decoder/Drivers |
Max Power Dissipation |
300mW |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74AHCT138 |
Pin Count |
16 |
Number of Outputs |
8 |
Operating Supply Voltage |
5V |
Circuit |
1 x 3:8 |
Polarity |
Inverting |
Power Supplies |
5V |
Number of Circuits |
1 |
Load Capacitance |
50pF |
Number of Bits |
8 |
Propagation Delay |
13 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
13 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
Decoder, Demultiplexer |
Number of Inputs |
3 |
Current - Output High, Low |
8mA 8mA |
Supply Type |
Single |
Bandwidth |
110MHz |
Power Supply Current-Max (ICC) |
0.04mA |
Voltage Supply Source |
Single Supply |
Input Conditioning |
STANDARD |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHCT138D Overview
Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tube is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.As a member of 74AHCT series, the multiplexers can be used for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.To find signal switch's related components, a base part number of 74AHCT138 may also be used.For multiplexer's system, 5V voltage is supplied.Signal switch has 16 component pins.As the end of conductors, it uses GULL WING.In this case, the supply type is Single.This multiplexer ic has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch object belongs to the family of AHCT/VHCT/VT.Signal multiplexer contains 8 bits.Normally, 5V is powered by a battery.As part of the operation of this turn signal switch, there are 8 outputs.Decoder/Drivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 4μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.This multiplexer provides 3 inputs.In order for the digitalswitch to function normally, it has 1 circuits.
SN74AHCT138D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AHCT138D Applications
There are a lot of Texas Instruments SN74AHCT138D Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- Code conversion
- Idle motor
- CPU memory location identification
- Data communication
- Enabling block of memory depending on address in memory chips
- Paper plants
- Automatic health monitoring systems
- Medical industry
- Microprocessor instruction decoding