Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Decoder/Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Polarity |
Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Propagation Delay |
12 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
13 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
Decoder, Demultiplexer |
Supply Type |
Single |
Bandwidth |
110MHz |
Logic IC Type |
OTHER DECODER/DRIVER |
High Level Output Current |
8mA |
Low Level Output Current |
8mA |
Number of Input Lines |
3 |
Number of Output Lines |
8 |
Input Conditioning |
STANDARD |
Height |
1.58mm |
Length |
9.9mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74AHCT138DG4 Overview
Due to the lack of space on the board, digital switch is provided in the SOIC.It is packaged in the way of Rail/Tube.The basic configuration of this system includes 16 terminations.In this case, 5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 16 component pins.As a result, GULL WING represents the end of the conductors.Single is employed as its supply type.There are 16 pins on it.The mounting point is Surface Mount.The logic switch belongs to the family of AHCT/VHCT/VT.Normally, 5V is powered by a battery.Decoder/Drivers is a category for the digital switch ics.Not being affected by the external factors, consumes 4μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.To accept voltage levels, the multiplexers have3 input lines.The signal source consists of 8 output lines.Signal switch operation at 85°C temperature is acceptable.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.The device is specified to operate at a maximum supply voltage of 5.5V in accordance with the applicable device specification.A minimum supply voltage of 4.5V is required to operate the digital swith.It contains 1 elements in mux switch configuration.IC OTHER DECODER/DRIVER is used for the logic of this chip.
SN74AHCT138DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
3 input lines
8 output lines
OTHER DECODER/DRIVER as the logic IC
SN74AHCT138DG4 Applications
There are a lot of Texas Instruments SN74AHCT138DG4 Signal Switches / Multiplexers / Decoders applications.
- Small scale TV wall
- GLAN
- Audio transmission
- Code converters
- Microprocessor instruction decoding
- VGA
- Paper plants
- Enabling different rows of memory depending on address in memory chips
- Data transfer
- Communication system