SN74AHCT138DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AHCT138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Power Dissipation | 300mW |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 13 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Power Supply Current-Max (ICC) | 0.04mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT138DGVR Overview
In order to save board space, digital switch is located in the 16-TFSOP (0.173, 4.40mm Width).Cut Tape (CT) is the method used for packaging.Mounting is performed using Surface Mount.In the multiplexers, the analog IC Decoder/Demultiplexer is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74AHCT series.It is designed with 16 terminations as part of its basic configuration.In addition, it also has a base part number of 74AHCT138, which can be used to find related parts.In multiplexer's system, 5V is the voltage supplied.Currently, this turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.In this case, the supply type is Single.The board has 16 pins configured.The mount is in Surface Mount.The logic switch is a member of the AHCT/VHCT/VT family.There are 8 bits signal multiplexer provides.It is provided that 5V has a power supply in order to function normally.There are 8 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as Decoder/Drivers.Without the influence of external factors, it consumes 4μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.A multiplexer such as this has 3 inputs available.The signal switching is packaged by TR. In order for the digitalswitch to function normally, it has 1 circuits.
SN74AHCT138DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AHCT138DGVR Applications
There are a lot of Texas Instruments SN74AHCT138DGVR Signal Switches / Multiplexers / Decoders applications.
- VGA
- To select different task for memory in microprocessor memory systems
- Code conversion
- Logic circuits
- CPU memory location identification
- Automatic Monitoring systems
- Used to connect a single source to multiple destinations
- Data transfer
- Steel plants
- Medical industry
