SN74AHCT138PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 12 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 13 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | 8mA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHCT138PWG4 Overview
As a means of saving space, digital switch is provided in the TSSOP.The package is packaged in accordance with Rail/Tube.Its basic configuration includes terminations in the 16 range.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.GULL WING represents the end of conductors.This supply type employs Single.This multiplexer ic has 16 pins configured.The mounting point is Surface Mount.There is a family of AHCT/VHCT/VT members.There is a power supply provided for the mux switch's normal operation of 5V.The digital switch ic is an electronic part classified into Decoder/Drivers.In the absence of external influences, it consumes 4μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The multiplexers have3 input lines on the board that accept voltage levels.In this case, the signal source has a total of 8 output lines.At 85°C, the maximum operating temperature of this signal switch is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.The device is specified to operate at the maximum supply voltage of 5.5V in accordance with its applicable specification.Typical device specifications specify a voltage supply of 4.5V for the digital swith.A configuration element for the mux switch consists of 1 elements.In order to implement its logic, it makes use of IC OTHER DECODER/DRIVER.
SN74AHCT138PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
3 input lines
8 output lines
OTHER DECODER/DRIVER as the logic IC
SN74AHCT138PWG4 Applications
There are a lot of Texas Instruments SN74AHCT138PWG4 Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Data demultiplexing
- HD surveillance system
- Solenoid cooling fan
- Audio transmission
- Code conversion
- Logic gates for other digital devices
- Communication system
- Data distribution
- LVDS
