SN74AHCT138PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 13 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Power Supply Current-Max (ICC) | 0.04mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT138PWR Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.The multiplexers can be used for a wide range of applications since they are members of 74AHCT series.Its basic configuration includes terminations in the 16 range.The part number for 74AHCT138 can be used to find its logic switch related parts as well.The multiplexer's system works with 5V voltage.This turn signal switch consists of 16 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.The board has 16 pins configured.Surface Mount is the way it is mounted.The logic switch is a member of the AHCT/VHCT/VT family.As a result, signal multiplexer provides a total of 8 bits.For mux switch's normal operation, power supply 5V is provided.The turn signal switch has 8 outputs.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 4μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.This multiplexer is equipped with 3 inputs and 3 outputs.According to TR, the switches is packaged.Normally, the digitalswitch consists of 1 circuits.
SN74AHCT138PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AHCT138PWR Applications
There are a lot of Texas Instruments SN74AHCT138PWR Signal Switches / Multiplexers / Decoders applications.
- Relay
- Seven segment displays
- Decimal decoder
- Data demultiplexing
- Steel plants
- Arithmetic Logic Units
- Paper plants
- Microprocessor instruction decoding
- Analog to digital conversion
- Time division multiplexing system
