Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, 74AHCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Decoder/Drivers |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74AHCT138 |
Pin Count |
16 |
Circuit |
1 x 3:8 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Load Capacitance |
50pF |
Propagation Delay |
12 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
Decoder, Demultiplexer |
Current - Output High, Low |
8mA 8mA |
Supply Type |
Single |
Output Polarity |
INVERTED |
Number of Input Lines |
3 |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Number of Output Lines |
8 |
Input Conditioning |
STANDARD |
Length |
9.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74AHCT138QDRG4Q1 Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.In the case of -40°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers of the Automotive, AEC-Q100, 74AHCT series can be used in a wide range of applications.The basic configuration includes 16 terminations.In addition, it also has a base part number of 74AHCT138, which can be used to find related parts.The multiplexer's system works with 5V voltage.This turn signal switch has 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.The board has 16 pins configured.The mount is in Surface Mount.Among the family of AHCT/VHCT/VT the logic switch is a member.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.5V.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.mux switch's normal operation requires the power supply of 5V.This is a signal switch that is categorized as Decoder/Drivers.TAPE AND REEL is used to package the switches.It is possible to accept voltage levels through 3 input lines of multiplexers.A signal source has 8 output lines.
SN74AHCT138QDRG4Q1 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
3 input lines
8 output lines
SN74AHCT138QDRG4Q1 Applications
There are a lot of Texas Instruments SN74AHCT138QDRG4Q1 Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Seven segment displays
- High-performance memory systems
- GLAN
- High-performance memory-decoding applications
- RF-based home automation system
- Textile mills
- Make half adder
- Steel plants
- Idle motor