SN74AHCT139PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 10.5 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 10.5 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 8.5 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT139PWR Overview
As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).It is packaged according to the Cut Tape (CT) method.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Decoder/Demultiplexer is used.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers from 74AHCT series can be used for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74AHCT139.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 16 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.Currently, it is configured with 16 pins.It is positioned in the direction of Surface Mount.In the AHCT/VHCT/VT family, the logic switch is included.Signal multiplexer consists of 4 bits.For mux switch's normal operation, there is a power supply provided at 5V.The turn signal switch has 4 outputs designed for operation.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 2μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.According to TR, the switches is packaged.To operate the digitalswitch normally, 2 circuits are formed.
SN74AHCT139PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AHCT139PWR Applications
There are a lot of Texas Instruments SN74AHCT139PWR Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- Enabling block of memory depending on address in memory chips
- Speed control of medern motors
- Audio transmission
- Frequency multiplexing system
- PCIe
- HD surveillance system
- Signal router
- Small scale TV wall
- Home automation system
