banner_page

SN74AHCT157DBR

16 Terminations4.5V~5.5V 16 Pin 74AHCT157 Signal switch74AHCT Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHCT157DBR
  • Package: 16-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 818
  • Description: 16 Terminations4.5V~5.5V 16 Pin 74AHCT157 Signal switch74AHCT Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SSOP (0.209, 5.30mm Width)
Number of Pins 16
Weight 128.593437mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74AHCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74AHCT157
Pin Count 16
Number of Outputs 1
Circuit 4 x 2:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Number of Channels 4
Load Capacitance 50pF
Number of Bits 2
Throw Configuration DPST
Propagation Delay 8.7 ns
Family AHCT/VHCT/VT
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 8mA 8mA
Supply Type Single
Bandwidth 110MHz
Prop. Delay@Nom-Sup 7.5 ns
Voltage Supply Source Single Supply
Independent Circuits 1
Height 2mm
Length 6.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AHCT157DBR Overview


Providing this information in the 16-SSOP (0.209, 5.30mm Width) enables digital switch board space to be saved.It is packaged according to the Cut Tape (CT) method.Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Multiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74AHCT series.There are 16 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 74AHCT157.For multiplexer's system, 5V voltage is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.As the end of conductors, it uses GULL WING.There is a supply type of Single employed as part of this supply.A total of 16 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of AHCT/VHCT/VT the logic switch is a member.Signal multiplexer consists of 2 bits.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.The turn signal switch contains 1 outputs designed to operate.It is provided with 8 inputs.According to TR, the switches is packaged.This turn signal switch's circuit is based on a circuit with 4 channels.

SN74AHCT157DBR Features


Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V

SN74AHCT157DBR Applications


There are a lot of Texas Instruments SN74AHCT157DBR Signal Switches / Multiplexers / Decoders applications.

  • Idle motor
  • Time division multiplexing system
  • Arithmetic Logic Units
  • Image transmission
  • Data communication
  • High-performance memory systems
  • Night vision cameras
  • Data collection system
  • Data-routing applications
  • LVDS

Write a review

Note: HTML is not translated!
    Bad           Good