SN74AHCT157DGVR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8.7 ns |
| Family | AHCT/VHCT/VT |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT157DGVR Overview
Due to the fact that it is provided in the 16-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Cut Tape (CT).Mounting is performed using Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers from 74AHCT series can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74AHCT157, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V voltage.Currently, this turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.The board has 16 pins configured.The mounting point is Surface Mount.The logic switch object belongs to the family of AHCT/VHCT/VT.As a result, signal multiplexer provides a total of 2 bits.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.It is provided that 5V has a power supply in order to function normally.As a result, the turn signal switch consists of 1 outputs.This multiplexer is equipped with 8 inputs and 8 outputs.TR is used to package the switches.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
SN74AHCT157DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74AHCT157DGVR Applications
There are a lot of Texas Instruments SN74AHCT157DGVR Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Robotic vehicles
- D/A converters
- Code conversion
- Combinational circuit
- Paper plants
- Home automation system
- Small scale TV wall
- Electronic circuits
- Communication system
