SN74AHCT157N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Output Current | 25mA |
| Number of Bits | 2 |
| Propagation Delay | 8.7 ns |
| Family | AHCT/VHCT/VT |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT157N Overview
As a means of saving space, digital switch is provided in the 16-DIP (0.300, 7.62mm).Tube represents its packaging.Digital switch ic uses a Through Hole mounting method.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.With the 74AHCT series, the multiplexers are suitable for a diverse range of applications.Its basic configuration includes terminations in the 16 range.The base part number is 74AHCT157, which is also useful when looking up signal switch's related components.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 16 can be found on this turn signal switch.Its supply type is Single, which is used as the source of power.A total of 16 pins are configured on this board.The mounting point is Through Hole.In the AHCT/VHCT/VT family, the logic switch is included.Signal multiplexer provides 2 bits.It is provided that 5V has a power supply in order to function normally.As part of the operation of this turn signal switch, there are 1 outputs.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 8 inputs.The turn signal switch's circuit consists of 4 transmission channels.For higher switches' flexibility, the output current is set to 25mA.
SN74AHCT157N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AHCT157N Applications
There are a lot of Texas Instruments SN74AHCT157N Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Communication system
- Implementing boolean functions with multiple variables
- Data distribution
- Analog to digital conversion
- Enabling block of memory depending on address in memory chips
- Transmission from the computer system of a satellite
- PCIe
- Make full adder
- Relay
