SN74AHCT157PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8.7 ns |
| Family | AHCT/VHCT/VT |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT157PWR Overview
As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.In addition to being a member of the 74AHCT series, these multiplexers have a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74AHCT157, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V voltage.A component pin count of 16 is found on this turn signal switch.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.There are 16 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of AHCT/VHCT/VT the logic switch is a member.As a result, signal multiplexer provides a total of 2 bits.In order to maintain mux switch's normal operation, power is provided to 5V.This turn signal switch has 1 outputs designed for its operation.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.In this multiplexer, there is a total of 8 inputs.A TR packaging method is used in the switches.A total of 4 channels are used for transmission in the turn signal switch's circuit.
SN74AHCT157PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AHCT157PWR Applications
There are a lot of Texas Instruments SN74AHCT157PWR Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Frequency multiplexing system
- Medical industry
- Electronics industry
- Communication system
- Textile mills
- Code converters
- Data demultiplexing
- Electronically controlled engine system
- Recording transmission
