SN74AHCT158PW
| Parameters | |
|---|---|
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 8.7 ns |
| Family | AHCT/VHCT/VT |
| Number of Inputs | 8 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Output Polarity | INVERTED |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
SN74AHCT158PW Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.Tube is the method used for packaging.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Multiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Several applications are possible for 74AHCT series multiplexers.As parts of its basic configuration, 16 terminations are desgined.In addition, it also has a base part number of 74AHCT158, which can be used to find related parts.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.With 16 pins, it is configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the AHCT/VHCT/VT family.In the signal multiplexer, there are 2 bits available.It is provided that 5V has a power supply in order to function normally.This turn signal switch has 1 outputs designed for its operation.The performance of the multiplexers can be reliably maintained at a voltage of 5V.In this multiplexer, there is a total of 8 inputs.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
SN74AHCT158PW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AHCT158PW Applications
There are a lot of Texas Instruments SN74AHCT158PW Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Data bus control
- Enabling different functions units in microprocessor instruction decoding
- Automatic Monitoring systems
- Injectors
- Combinational circuit
- Automatic health monitoring systems
- Robotic vehicles
- Night vision cameras
- Data-routing applications
