SN74AHCT16373DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AHCT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 16 |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 10.5 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT16373DGGR Overview
There is an embedded version of it in package 48-TFSOP (0.240, 6.10mm Width). A package of Cut Tape (CT) has been used. There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. A 4.5V~5.5V supply voltage is required to operate it. There is a temperature of -40°C~85°C at which the system operates. There are a number of FPGAs in this series, including this one. The electronic part in this image has 16 bits. This device has 48 terminations. The family it belongs to is 74AHCT16373. It operates with a supply voltage of 5V. It has 48 pins that makes it easy to use. In terms of electronic devices, this one is in the AHCT/VHCT/VT family. 48 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. There are 5V power supplies attached to it. The reliability of this device makes it well suited to TR. It features maximum flexibility in design due to 8mA output current. For maximum efficiency, the supply voltage should be set to 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. In total, it has 2 elements. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.
SN74AHCT16373DGGR Features
48-TFSOP (0.240, 6.10mm Width) package
74AHCT series
16 Bits
74AHCT16373 family
48 pin count
48 pins
5V power supplies
2 elements
SN74AHCT16373DGGR Applications
There are a lot of Texas Instruments SN74AHCT16373DGGR Latches applications.
- Motor Drives
- Decade counting
- Parallel Input
- Buffer/Storage Registers
- Frequency
- Multi-line decoders
- Control circuits
- Pseudo-random code generators
- Decade counting 7-segment decimal display
- Lamp and Display (LED)
