SN74AHCT16373DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74AHCT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 16 |
| Propagation Delay | 12 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 10.5 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT16373DLR Overview
There is an embedded version of it in package 48-BSSOP (0.295, 7.50mm Width). Tape & Reel (TR) is the way in which it is packaged. It uses the output configuration Tri-State. This electrical device has the logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. The operating temperature is -40°C~85°C. In the 74AHCT series, this FPGA is located. The design of this electronic part contains 16 bits. This device has been designed with 48 terminations available. The family 74AHCT16373 includes it. In order to function, the supply voltage should be set to 5V. The device is equipped with 48 pins. AHCT/VHCT/VT is the family of this electronic device. The device has 48 pins. This electronic part is mounted in the way of Surface Mount. In this device, there are 2 ports. FF/Latches is the subcategory of this part. The system is powered by 5V sources. This device is well suited for TR based on its reliable performance. The output current of 8mA makes it feature maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 16 output lines. There are no external factors that affect it, so it consumes 4μA quiescent current. In total, it has 2 elements. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74AHCT16373DLR Features
48-BSSOP (0.295, 7.50mm Width) package
74AHCT series
16 Bits
74AHCT16373 family
48 pin count
48 pins
5V power supplies
2 elements
SN74AHCT16373DLR Applications
There are a lot of Texas Instruments SN74AHCT16373DLR Latches applications.
- Communication systems
- Multistage ripple counting
- Hammer Device Information
- Clocks
- Serial Input
- Parallel Output
- Parallel Input
- Instrumentation
- Control circuits
- Shift left register
