SN74AHCT16374DGGR

4.5V~5.5V 130MHz 16 Bit D-Type Flip Flop DUAL 74AHCT16374 48 Pins 4μA 74AHCT Series 48-TFSOP (0.240, 6.10mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AHCT16374DGGR
Package: 48-TFSOP (0.240, 6.10mm Width)
Datasheet: -
Stock: 945
Description: 4.5V~5.5V 130MHz 16 Bit D-Type Flip Flop DUAL 74AHCT16374 48 Pins 4μA 74AHCT Series 48-TFSOP (0.240, 6.10mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-TFSOP (0.240, 6.10mm Width)
Number of Pins	48
Weight	223.195796mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
Series	74AHCT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
ECCN Code	EAR99
Type	D-Type
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceiver
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	74AHCT16374
Function	Standard
Output Type	Tri-State, Non-Inverted
Operating Supply Voltage	5V
Number of Elements	2
Polarity	Non-Inverting
Power Supplies	5V
Load Capacitance	50pF
Number of Ports	2
Number of Bits	16
Clock Frequency	130MHz
Propagation Delay	10.4 ns
Turn On Delay Time	1 ns
Family	AHCT/VHCT/VT
Logic Function	D-Type, Flip-Flop
Current - Quiescent (Iq)	4μA
Current - Output High, Low	8mA 8mA
Number of Bits per Element	8
Max Propagation Delay @ V, Max CL	10.4ns @ 5V, 50pF
Prop. Delay@Nom-Sup	11.5 ns
Trigger Type	Positive Edge
Input Capacitance	2.5pF
Power Supply Current-Max (ICC)	0.04mA
Number of Output Lines	3
Count Direction	UNIDIRECTIONAL
Clock Edge Trigger Type	Positive Edge
Translation	N/A
Max Frequency@Nom-Sup	75000000Hz
Height	1.2mm
Length	12.5mm
Width	6.1mm
Thickness	1.15mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74AHCT16374DGGR Overview

48-TFSOP (0.240, 6.10mm Width)is the packaging method. D flip flop is included in the Cut Tape (CT)package. The output it is configured with uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The 74AHCTseries comprises this type of FPGA. There should be no greater frequency than 130MHzon its output. There are 2 elements in it. T flip flop consumes 4μA quiescent energy. Currently, there are 48 terminations. The 74AHCT16374 family contains it. The D flip flop is powered by a voltage of 5V . There is 2.5pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the AHCT/VHCT/VTfamily. There is an electronic component mounted in the way of Surface Mount. A total of 48pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the Bus Driver/Transceiverbase part number family. This flip flop is designed with 16 Bits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The system runs on a power supply of 5V watts. This flip flop has a total of 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.