SN74AHCT16374DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AHCT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 11.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT16374DGVR Overview
The flip flop is packaged in a case of 48-TFSOP (0.173, 4.40mm Width). Package Cut Tape (CT)embeds it. It is configured with Tri-State, Non-Invertedas an output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74AHCTseries FPGA. You should not exceed 130MHzin the output frequency of the device. A total of 2 elements are present. During its operation, it consumes 4μA quiescent energy. A total of 48terminations have been recorded. The object belongs to the 74AHCT16374 family. A voltage of 5V is used to power it. Its input capacitance is 2.5pF farads. This D flip flop belongs to the family of AHCT/VHCT/VT. Electronic part Surface Mountis mounted in the way. A total of 48pins are provided on this board. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. Flip flops designed with 16bits are used in this part. In view of its reliability, this D flip flop is a good fit for TR. It operates from 5V power supplies. The D flip flop is embedded with 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. In order for the chip to function, it has 3output lines.
SN74AHCT16374DGVR Features
Cut Tape (CT) package
74AHCT series
48 pins
16 Bits
5V power supplies
SN74AHCT16374DGVR Applications
There are a lot of Texas Instruments SN74AHCT16374DGVR Flip Flops applications.
- Individual Asynchronous Resets
- Event Detectors
- Instrumentation
- Cold spare funcion
- Modulo – n – counter
- Latch-up performance
- Frequency division
- Functionally equivalent to the MC10/100EL29
- High Performance Logic for test systems
- Load Control
