SN74AHCT16374DLR

4.5V~5.5V 130MHz 16 Bit D-Type Flip Flop DUAL 74AHCT16374 48 Pins 4μA 74AHCT Series 48-BSSOP (0.295, 7.50mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AHCT16374DLR
Package: 48-BSSOP (0.295, 7.50mm Width)
Datasheet: -
Stock: 495
Description: 4.5V~5.5V 130MHz 16 Bit D-Type Flip Flop DUAL 74AHCT16374 48 Pins 4μA 74AHCT Series 48-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-BSSOP (0.295, 7.50mm Width)
Number of Pins	48
Weight	600.301152mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
Series	74AHCT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
ECCN Code	EAR99
Type	D-Type
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	FF/Latches
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Base Part Number	74AHCT16374
Function	Standard
Output Type	Tri-State, Non-Inverted
Operating Supply Voltage	5V
Number of Elements	2
Polarity	Non-Inverting
Power Supplies	5V
Load Capacitance	50pF
Number of Ports	2
Number of Bits	16
Clock Frequency	130MHz
Propagation Delay	10.4 ns
Turn On Delay Time	1 ns
Family	AHCT/VHCT/VT
Logic Function	D-Type, Flip-Flop
Current - Quiescent (Iq)	4μA
Current - Output High, Low	8mA 8mA
Number of Bits per Element	8
Max Propagation Delay @ V, Max CL	10.4ns @ 5V, 50pF
Prop. Delay@Nom-Sup	11.5 ns
Trigger Type	Positive Edge
Input Capacitance	2.5pF
Power Supply Current-Max (ICC)	0.04mA
Number of Output Lines	3
Count Direction	UNIDIRECTIONAL
Clock Edge Trigger Type	Positive Edge
Translation	N/A
Max Frequency@Nom-Sup	75000000Hz
Height	2.79mm
Length	15.88mm
Width	7.49mm
Thickness	2.59mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74AHCT16374DLR Overview

The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. As part of the package Cut Tape (CT), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74AHCTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 130MHz. D latch consists of 2 elements. T flip flop consumes 4μA quiescent energy. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74AHCT16374family includes it. It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 2.5pF farads. In terms of electronic devices, this device belongs to the AHCT/VHCT/VTfamily of devices. There is an electronic part mounted in the way of Surface Mount. There are 48pins on it. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. There are 16bits in this flip flop. This D flip flop is well suited for TR based on its reliable performance. An electrical current of 5V volts is applied to it. The D flip flop is embedded with 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.