SN74AHCT174NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT174NSR Overview
The package is in the form of 16-SOIC (0.209, 5.30mm Width). The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74AHCTseries of FPGAs. This D flip flop should not have a frequency greater than 115MHz. There are 1 elements in it. As a result, it consumes 4μA quiescent current. A total of 16 terminations have been made. D latch belongs to the 74AHCT174 family. It is powered by a voltage of 5V . There is 2pF input capacitance for this T flip flop. This D flip flop belongs to the family of AHCT/VHCT/VT. There is an electronic part that is mounted in the way of Surface Mount. There are 16pins on it. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. Despite its superior flexibility, it relies on 7 circuits to achieve it. As a result of its reliable performance, this T flip flop is suitable for TR. In order for the device to operate, it requires 5V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 5V. A total of 3input lines have been provided.
SN74AHCT174NSR Features
Tape & Reel (TR) package
74AHCT series
16 pins
5V power supplies
SN74AHCT174NSR Applications
There are a lot of Texas Instruments SN74AHCT174NSR Flip Flops applications.
- Clock pulse
- QML qualified product
- Safety Clamp
- Frequency Dividers
- Matched Rise and Fall
- Data Synchronizers
- Load Control
- Balanced 24 mA output drivers
- Single Up Count-Control Line
- Power down protection
