SN74AHCT273DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AHCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Number of Input Lines | 3 |
| fmax-Min | 65 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AHCT273DGVR Overview
The flip flop is packaged in 20-TFSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. As configured, the output uses Non-Inverted. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. The FPGA belongs to the 74AHCT series. A frequency of 75MHzshould not be exceeded by its output. In total, it contains 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. You can search similar parts based on 74AHCT273. The power source is powered by 5V. A JK flip flop with a 2.5pFfarad input capacitance is used here. The electronic device belongs to the AHCT/VHCT/VTfamily. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. This device has the base part number FF/Latches. An electronic part with 8bits has been designed. Due to its superior flexibility, it uses 8 circuits. Considering the reliability of this T flip flop, it is well suited for TR. The power supply is 5V. In order to ensure high efficiency, the supply voltage should remain at 5V. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74AHCT273DGVR Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
5V power supplies
SN74AHCT273DGVR Applications
There are a lot of Texas Instruments SN74AHCT273DGVR Flip Flops applications.
- ESCC
- Frequency division
- Computers
- ESD protection
- Power down protection
- Frequency Dividers
- Individual Asynchronous Resets
- QML qualified product
- Synchronous counter
- Communications
