SN74AHCT367DGVR
| Parameters | |
|---|---|
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ONE FUNCTION WITH TWO BITS |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT367 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 5.8 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 9.5 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 2, 4 (Hex) |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 6 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
SN74AHCT367DGVR Overview
Logical driver uses a neat 16-TFSOP (0.173, 4.40mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74AHCT series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic component belongs to the AHCT/VHCT/VT family. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. The bus transceiver employs 2, 4 (Hex) bits for each element. You can search "74AHCT367" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features ONE FUNCTION WITH TWO BITS to better serve the need. Because of its 6 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74AHCT367DGVR Features
Bus Driver/Transceivers
ONE FUNCTION WITH TWO BITS
SN74AHCT367DGVR Applications
There are a lot of Texas Instruments SN74AHCT367DGVR Buffers & Transceivers applications.
- Clock radio
- Laser diode bonding
- Optical sub-assembly (OSA)
- Transmission stations
- Fiber distributed data interface (FDDI)
- IPTV front end
- IP cameras
- Cable network front end
- Vehicle, ship, aircraft navigation and positioning
- Structural bonding
