Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.209, 5.30mm Width) |
Number of Pins |
20 |
Weight |
156.687814mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74AHCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74AHCT373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
8mA |
Number of Bits |
8 |
Propagation Delay |
14.5 ns |
Turn On Delay Time |
1 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
D-Type, Flip-Flop, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2mm |
Length |
7.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHCT373DBR Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. A package of Cut Tape (CT) has been used. There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. An FPGA of this type belongs to the 74AHCT series. This electronic part is designed with 8 Bits. This device has 20 terminations. The family 74AHCT373 includes it. In order to function, the supply voltage should be set to 5V. The 20 pind are equipped with it. It is part of the family of electronic devices called AHCT/VHCT/VT. The pin configuration of the device is 20. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. A total of 5V power supplies are needed to run it. It contains 3 input lines where electronic circuits are present. As a result of its reliable performance, it is well suited for TR. It features maximum flexibility in design due to 8mA output current. High efficiency requires a voltage supply of 5V. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.
SN74AHCT373DBR Features
20-SSOP (0.209, 5.30mm Width) package
74AHCT series
8 Bits
74AHCT373 family
20 pin count
20 pins
5V power supplies
SN74AHCT373DBR Applications
There are a lot of Texas Instruments SN74AHCT373DBR Latches applications.
- Automatic test equipment
- Pseudo-random code generators
- Automotive HEV/EV Powertrain
- A/D converters
- Multi-line decoders
- Serial Output Register
- Parallel data synchronization
- Frequency dividing
- Counter control
- Ring counter