SN74AHCT373DBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHCT373DBRG4 Overview
There is an embedded version of it in package SSOP. This package has the format of Tape and Reel. An electronic part with 8 bits is designed. This device has 20 terminations. The device is operated when the supply voltage is set to 5V. The device is equipped with 20 pins. AHCT/VHCT/VT is the family of this electronic device. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. There is a subcategory of FF/Latches for this part. There are 5V power supplies required for this machine to operate. High efficiency requires a supply voltage of 5V. Without external influences, it consumes 4μA of quiescent current. 8mA is the low level output current. It is set to zero for the high level output current. Lower than 85°C is the ideal operating temperature. In order for the system to operate properly, the operating temperature should be higher than -40°C. There is a maximum voltage of 5.5V supported. A minimal voltage of 4.5V is needed to operate it. There is a logic IC BUS DRIVER used in the system. Its output current of 8mA ensures maximum design flexibility.
SN74AHCT373DBRG4 Features
SSOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74AHCT373DBRG4 Applications
There are a lot of Texas Instruments SN74AHCT373DBRG4 Latches applications.
- Instrumentation
- Parallel data storage
- Relay
- Clocks
- Serial Output Data Queuing
- Data acquisition
- Audio and video switching
- Frequency dividing
- Address register
- Automotive HEV/EV Powertrain
