banner_page

SN74AHCT373DWR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHCT373DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 482
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Number of Functions 1
Supply Voltage 5V
Base Part Number 74AHCT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 8mA
Number of Bits 8
Propagation Delay 14.5 ns
Turn On Delay Time 1 ns
Family AHCT/VHCT/VT
Logic Function D-Type, Latch
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74AHCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260

SN74AHCT373DWR Overview


In the package 20-SOIC (0.295, 7.50mm Width), it can be found. Tape & Reel (TR) is the way in which it is packaged. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. With a supply voltage of 4.5V~5.5V, it operates. There is -40°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. This type belongs to the 74AHCT373 family. In order to function, the supply voltage should be set to 5V. It is equipped with 20 pin count. AHCT/VHCT/VT is the family of this electronic device. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. 2 ports are available on this device. It belongs to the subcategory of FF/Latches. There is 5V power supply for it. There are 3 input lines in which electronic circuits are present. On the basis of its reliability, this device is well suited for TR. Its 8mA output current allows for maximum design flexibility. High efficiency requires a voltage supply of 5V. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.

SN74AHCT373DWR Features


20-SOIC (0.295, 7.50mm Width) package
74AHCT series
8 Bits
74AHCT373 family
20 pin count
20 pins
5V power supplies

SN74AHCT373DWR Applications


There are a lot of Texas Instruments SN74AHCT373DWR Latches applications.

  • Four-bit storage with output enable
  • Parallel data storage
  • Parallel Input
  • PCs and Notebooks
  • Counter timers
  • Counter control
  • Relay replacement
  • Multi-line decoders
  • OC-48 communication systems
  • Data acquisition

Write a review

Note: HTML is not translated!
    Bad           Good