banner_page

SN74AHCT373N

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT373 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHCT373N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 904
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT373 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 8mA
Number of Bits 8
Propagation Delay 14.5 ns
Turn On Delay Time 1 ns
Family AHCT/VHCT/VT
Logic Function D-Type, Latch
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 1.1991g
Operating Temperature -40°C~85°C
Packaging Tube
Series 74AHCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 1MHz
Base Part Number 74AHCT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8

SN74AHCT373N Overview


A package called 20-DIP (0.300, 7.62mm) contains it. Tube is the way in which it is packaged. Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. A Through Hole mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. It operates at -40°C~85°C degrees Celsius. An FPGA in this series belongs to the 74AHCT family. This electronic part is designed with 8 Bits. This device has 20 terminations. The family in which it belongs to is 74AHCT373. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of AHCT/VHCT/VT. In addition, it is designed with a pin number of 20. Through Hole is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. Electronic circuits comprise 3 input lines. With an output current of 8mA, it is highly flexible in terms of design. Optimal efficiency requires 5V as the supply voltage. In order to operate properly, its maximum power current (ICC) should be 0.04mA.

SN74AHCT373N Features


20-DIP (0.300, 7.62mm) package
74AHCT series
8 Bits
74AHCT373 family
20 pin count
20 pins
5V power supplies

SN74AHCT373N Applications


There are a lot of Texas Instruments SN74AHCT373N Latches applications.

  • Shift left register
  • Parallel data storage
  • Digital bus buffer
  • Automotive Body Electronics
  • Multistage ripple counting
  • A/D converters
  • Lamp and Display (LED)
  • Double bus register system
  • Parallel Output
  • Timers

Write a review

Note: HTML is not translated!
    Bad           Good