Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.209, 5.30mm Width) |
Number of Pins |
20 |
Weight |
266.712314mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74AHCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74AHCT373 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
8mA |
Number of Bits |
8 |
Propagation Delay |
9.5 ns |
Turn On Delay Time |
1 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2mm |
Length |
12.6mm |
Width |
5.3mm |
Thickness |
1.95mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHCT373NSR Overview
Package 20-SOIC (0.209, 5.30mm Width) includes it. As a result, it has a packaging of Tape & Reel (TR). It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. It operates at -40°C~85°C degrees Celsius. The 74AHCT series is associated with this FPGA. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. The family 74AHCT373 includes it. The device is operated when the supply voltage is set to 5V. With 20 pins, it is equipped. In terms of electronic devices, this one is in the AHCT/VHCT/VT family. 20 pins are used in its design. The electronic part is mounted using the Surface Mount method. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. There is a maximum voltage supply (Vsup) that reaches 5.5V. A total of 5V power supplies are needed to run it. The supply voltage (Vsup) should be greater than 4.5V. An electronic circuit can be found on 8 input lines. Based on its reliable performance, this device is suitable for TR. Due to its 8mA output current, it offers maximum design flexibility. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74AHCT373NSR Features
20-SOIC (0.209, 5.30mm Width) package
74AHCT series
8 Bits
74AHCT373 family
20 pin count
20 pins
5V power supplies
SN74AHCT373NSR Applications
There are a lot of Texas Instruments SN74AHCT373NSR Latches applications.
- Network Switches
- Buffer register
- Bus system register with enable parallel lines at bus side
- Counter
- Meter applications
- Automotive Body Electronics
- Clocks
- Multistage ripple counting
- PCs and Notebooks
- Counting