banner_page

SN74AHCT373PW

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHCT373PW
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 709
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74AHCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74AHCT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 8mA
Number of Bits 8
Propagation Delay 14.5 ns
Turn On Delay Time 1 ns
Family AHCT/VHCT/VT
Logic Function D-Type, Latch
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AHCT373PW Overview


In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. The package is in the form of Tube. In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. During operation, the temperature is set at -40°C~85°C. The 74AHCT series contains FPGAs of this type. The electronic part in this image has 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family it belongs to is 74AHCT373. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. AHCT/VHCT/VT is the family of this electronic device. The pin configuration of the device is 20. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. There is a subcategory of FF/Latches for this part. The device is powered by 5V power supplies. Electronic circuits are represented by 3 input lines. As the output current is 8mA, the design flexibility is maximum. High efficiency requires a voltage supply of 5V. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.

SN74AHCT373PW Features


20-TSSOP (0.173, 4.40mm Width) package
74AHCT series
8 Bits
74AHCT373 family
20 pin count
20 pins
5V power supplies

SN74AHCT373PW Applications


There are a lot of Texas Instruments SN74AHCT373PW Latches applications.

  • Four-bit storage with output enable
  • Relay replacement
  • Communication systems
  • Shift register
  • Pattern generators
  • Hammer
  • Buffer register
  • Parallel Output
  • Data acquisition
  • Double bus register system

Write a review

Note: HTML is not translated!
    Bad           Good