SN74AHCT373PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT373PWR Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). Cut Tape (CT) is the way in which it is packaged. It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74AHCT series of FPGAs is the one this FPGA belongs to. This electronic part is designed with 8 Bits. This device has 20 terminations. The family in which it belongs to is 74AHCT373. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. There is a device in this electronic family called AHCT/VHCT/VT. 20 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. Electronic circuits comprise 3 input lines. Considering the reliability of this device, it would be a good candidate for TR. As the output current is 8mA, the design flexibility is maximum. In order to achieve high efficiency, the supply voltage should be kept at 5V. The maximal power current (ICC) supplied for its operation reaches 0.04mA.
SN74AHCT373PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74AHCT series
8 Bits
74AHCT373 family
20 pin count
20 pins
5V power supplies
SN74AHCT373PWR Applications
There are a lot of Texas Instruments SN74AHCT373PWR Latches applications.
- Serial Input
- Pattern generators
- BCD counting
- General-Purpose Register
- Automotive ADAS
- Parallel Input
- Digital bus buffer
- Clocks
- OC-48 communication systems
- Hammer
