SN74AHCT374N
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74AHCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Max Output Current | 8mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
SN74AHCT374N Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Through Holemounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. -40°C~85°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74AHCT series. Its output frequency should not exceed 130MHz Hz. In total, it contains 1 elements. During its operation, it consumes 4μA quiescent energy. It has been determined that there have been 20 terminations. The 74AHCT374 family contains this object. Power is supplied from a voltage of 5V volts. This T flip flop has a capacitance of 4pF farads at the input. Electronic devices of this type belong to the AHCT/VHCT/VTfamily. There is an electronic part mounted in the way of Through Hole. It is designed with 20 pins. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. In order to achieve its superior flexibility, 8 circuits are used. It operates from 5V power supplies. There are 2 ports embedded in the flip flops. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. Featuring the maximum design flexibility, it has an output current of 8mA . It has 3lines.
SN74AHCT374N Features
Tube package
74AHCT series
20 pins
8 Bits
5V power supplies
SN74AHCT374N Applications
There are a lot of Texas Instruments SN74AHCT374N Flip Flops applications.
- Buffer registers
- Cold spare funcion
- Supports Live Insertion
- Buffered Clock
- QML qualified product
- Data Synchronizers
- ESCC
- Modulo – n – counter
- Latch
- Storage registers
