Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
60.186038mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74AHCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74AHCT573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
8mA |
Number of Bits |
8 |
Propagation Delay |
8 ns |
Turn On Delay Time |
1 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHCT573DGVR Overview
A package called 20-TFSOP (0.173, 4.40mm Width) contains it. Cut Tape (CT) is the way in which it is packaged. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Surface Mount. There is no supply voltage for this device. It operates at -40°C~85°C degrees Celsius. The 74AHCT series of FPGAs is the one this FPGA belongs to. There are 8 bits in this electronic part. As far as this device is concerned, it has no terminations. As a member of the 74AHCT573 family, it falls under that category. The device is operated when the supply voltage is set to 5V. 20 pins are provided. It is a member of the AHCT/VHCT/VT family of electronic devices. There are 20 pins on it. Surface Mount is used to mount this electronic part. This device has 2 ports. It belongs to the subcategory of FF/Latches. There is 5V power supply for it. It consists of 3 input lines from which an electronic circuit can be built. The device's reliable performance makes it a good choice for TR. With 8mA, maximum design flexibility is ensured. If you want to achieve high efficiency, make sure the supply voltage is at 5V. A maximal power current (ICC) is generated for its operation at 0.04mA.
SN74AHCT573DGVR Features
20-TFSOP (0.173, 4.40mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies
SN74AHCT573DGVR Applications
There are a lot of Texas Instruments SN74AHCT573DGVR Latches applications.
- Instrumentation
- Counting
- Programmable binary
- Hammer
- Digital bus buffer
- Counter timers
- Display driver
- Parallel data storage
- Decade counting 7-segment decimal display
- Stacked or Push-Down Registers