Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74AHCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74AHCT573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
8mA |
Number of Bits |
8 |
Propagation Delay |
8 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
1 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHCT573DW Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. Tube is the way it is packaged. It uses Tri-State as the output. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -40°C~85°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. 74AHCT573 is the family name of it. With the supply voltage set at 5V, it is able to operate. It is equipped with 20 pin count. This electronic device belongs to the family of AHCT/VHCT/VT. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. 5V power supplies are needed to operate it. An electronic circuit can be found on 3 input lines. The 8mA output current gives it maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. Without external influences, it consumes 4μA quiescent current. The superior flexibility of the system is achieved through its use of 8 circuits. Its maximum current supply (ICC) reaches 0.04mA.
SN74AHCT573DW Features
20-SOIC (0.295, 7.50mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies
SN74AHCT573DW Applications
There are a lot of Texas Instruments SN74AHCT573DW Latches applications.
- Flip-flops
- Buffer register
- Hammer Device Information
- Display
- Display driver
- Counters
- PCs and Notebooks
- Meter applications
- Sample and hold register
- Parallel Input