SN74AHCT573DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Independent Circuits | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHCT573DWG4 Overview
The package in which it is embedded is named SOIC. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With the supply voltage set at 5V, it is able to operate. There are 20 pins on it. It is a member of the AHCT/VHCT/VT family of electronic devices. There are 20 pins on it. The electronic part is mounted in a way that corresponds to Surface Mount. This device has a total of 2 ports. FF/Latches is the subcategory of this part. There are 5V power supplies attached to it. A high level of efficiency is achieved by maintaining the supply voltage at 5V. The circuit's superior flexibility is achieved through the use of 8 circuits. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. In the low level output current, the value is set to 8mA. -8mA is the high level output current. It is recommended to work at a temperature lower than 125°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. It supports the maximal supply voltage of 5.5V. This device requires a minimum voltage of 4.5V. It uses the logic IC BUS DRIVER. The output current of 8mA makes it feature maximum design flexibility.
SN74AHCT573DWG4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74AHCT573DWG4 Applications
There are a lot of Texas Instruments SN74AHCT573DWG4 Latches applications.
- Parallel data synchronization
- Automotive ADAS
- Shift register
- Buffer register
- Counting
- Multi-line decoders
- Avionics
- Counter control
- Shift left register
- Pattern Generators
