banner_page

SN74AHCT573DWR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHCT573DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 842
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74AHCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74AHCT573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 8mA
Number of Bits 8
Propagation Delay 12 ns
Quiescent Current 4μA
Turn On Delay Time 1 ns
Family AHCT/VHCT/VT
Logic Function D-Type, Latch
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AHCT573DWR Overview


In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. This package has the format of Tape & Reel (TR). It uses Tri-State as the output. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. The supply voltage of the device is 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. The 74AHCT series is associated with this FPGA. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations that have been designed. The family 74AHCT573 includes it. With the supply voltage set at 5V, it is able to operate. 20 pins are provided. There is a device in this electronic family called AHCT/VHCT/VT. There are 20 pins on it. A Surface Mount mounting method has been used for this electronic part. This device is equipped with 2 ports. This part can be found within the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. It consists of 3 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is well suited to TR. It features maximum flexibility in design due to 8mA output current. High efficiency requires a voltage supply of 5V. There are no external factors that affect it, so it consumes 4μA quiescent current. The superior flexibility of the system is achieved through its use of 8 circuits. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.

SN74AHCT573DWR Features


20-SOIC (0.295, 7.50mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies

SN74AHCT573DWR Applications


There are a lot of Texas Instruments SN74AHCT573DWR Latches applications.

  • Frequency
  • Automotive Cluster
  • Four-bit storage with output enable
  • Buffer register
  • Serial Input
  • Synchronous frequency dividers
  • Shift register
  • Timers
  • Automotive HEV/EV Powertrain
  • Shift Registers

Write a review

Note: HTML is not translated!
    Bad           Good