banner_page

SN74AHCT573N

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT573 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHCT573N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 983
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AHCT Series 74AHCT573 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 1.1991g
Operating Temperature -40°C~85°C
Packaging Tube
Series 74AHCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number 74AHCT573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 8mA
Number of Bits 8
Propagation Delay 12 ns
Quiescent Current 4μA
Turn On Delay Time 1 ns
Family AHCT/VHCT/VT
Logic Function D-Type, Latch
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AHCT573N Overview


In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. It is packaged in the way of Tube. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Through Hole. The voltage supply is 4.5V~5.5V. It operates at -40°C~85°C degrees Celsius. An FPGA in this series belongs to the 74AHCT family. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. 74AHCT573 is its family. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. It is part of the family of electronic devices called AHCT/VHCT/VT. The 20 pins are designed into it. Electronic parts are mounted using the Through Hole method. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. The device is powered by 5V power supplies. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. As the output current is 8mA, the design flexibility is maximum. High efficiency requires maintaining the supply voltage at 5V. Aquiescent current is consumed by 4μA without being affected by external forces. 8 circuits enable it to achieve high performance. Maximum power supply (ICC) for its operation is 0.04mA.

SN74AHCT573N Features


20-DIP (0.300, 7.62mm) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies

SN74AHCT573N Applications


There are a lot of Texas Instruments SN74AHCT573N Latches applications.

  • Hammer
  • Automotive Infotainment
  • Parallel data storage
  • Shift left with parallel loading
  • Counting
  • Timers
  • Automotive HEV/EV Powertrain
  • Data acquisition
  • Digital bus buffer
  • Shift right with parallel loading

Write a review

Note: HTML is not translated!
    Bad           Good