SN74AHCT573NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT573NSRE4 Overview
In the package 20-SOIC (0.209, 5.30mm Width), it can be found. The package is in the form of Tape & Reel (TR). It uses Tri-State as its output configuration. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. There is no supply voltage for this device. During operation, the temperature is set at -40°C~85°C. 74AHCT is the series number of this FPGA. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74AHCT573 is the family name of it. With a supply voltage of 5V, it operates. The device is equipped with 20 pins. It is part of the family of electronic devices called AHCT/VHCT/VT. It is designed with 20 pins. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches includes this part. Vsup reaches 5.5V as the maximum supply voltage. A total of 5V power supplies are required for it to operate. The supply voltage (Vsup) should be greater than 4.5V. There are 8 input lines in which electronic circuits are present. The reliability of this device makes it well suited to TAPE AND REEL. Its output current of 8mA ensures maximum design flexibility.
SN74AHCT573NSRE4 Features
20-SOIC (0.209, 5.30mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies
SN74AHCT573NSRE4 Applications
There are a lot of Texas Instruments SN74AHCT573NSRE4 Latches applications.
- Shift left register
- Counter control
- Hammer
- Avionics
- BCD counting
- Shift right with parallel loading
- Parallel data storage
- Multistage ripple counting
- Shift Registers
- A/D converters
