SN74AHCT573PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT573PWRG4 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way it is packaged. Tri-State is used for the output it is configured with. This electrical device has Logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. It operates at -40°C~85°C degrees Celsius. The 74AHCT series is associated with this FPGA. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family it belongs to is 74AHCT573. In order to operate it, the supply voltage must be 5V. 20 pins are included. There is a device in this electronic family called AHCT/VHCT/VT. The 20 pins are designed into it. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of FF/Latches. The system is powered by 5V sources. An electronic circuit can be found on 8 input lines. Its reliable performance makes it an excellent choice for TR. The 8mA output current gives it maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74AHCT573PWRG4 Features
20-TSSOP (0.173, 4.40mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies
SN74AHCT573PWRG4 Applications
There are a lot of Texas Instruments SN74AHCT573PWRG4 Latches applications.
- Storage
- Accumulator Registers
- Stacked or Push-Down Registers
- Registers
- Clocks
- Synchronous frequency dividers
- Multi-line decoders
- Flip-flops
- High-speed logic
- Control circuits
