SN74AHCT74DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT74DBR Overview
The flip flop is packaged in 14-SSOP (0.209, 5.30mm Width). The package Cut Tape (CT)contains it. Differentialis the output configured for it. The trigger it is configured with uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at 4.5V~5.5Vvolts. A temperature of -40°C~125°C TAis used in the operation. It belongs to the type D-Typeof flip flops. It belongs to the 74AHCTseries of FPGAs. You should not exceed 140MHzin its output frequency. It consumes 2μA of quiescent Terminations are 14. If you search by 74AHCT74, you will find similar parts. The D flip flop is powered by a voltage of 5V . Its input capacitance is 2pFfarads. In this case, the D flip flop belongs to the AHCT/VHCT/VTfamily. It is mounted in the way of Surface Mount. This board has 14 pins. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latch base part number. To achieve this superior flexibility, 2 circuits are used. Considering the reliability of this T flip flop, it is well suited for TR. An electrical current of 5V volts is applied to it. The supply voltage should be maintained at 5V for high efficiency. Currently, there are 4 input lines present.
SN74AHCT74DBR Features
Cut Tape (CT) package
74AHCT series
14 pins
5V power supplies
SN74AHCT74DBR Applications
There are a lot of Texas Instruments SN74AHCT74DBR Flip Flops applications.
- Computers
- Data Synchronizers
- Dynamic threshold performance
- Frequency Divider circuits
- Divide a clock signal by 2 or 4
- ATE
- Automotive
- Balanced Propagation Delays
- Computing
- High Performance Logic for test systems
