SN74AHCT74DE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 140MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 4 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHCT74DE4 Overview
It is packaged in the way of SOIC. D latch consists of 2 elements. A total of 14terminations have been recorded. Power is provided by a 5V supply. This D flip flop belongs to the family of AHCT/VHCT/VT. It is mounted in the way of Surface Mount. This board is designed with 14pins on it. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. As a result of its reliable performance, this T flip flop is suitable for TUBE. It operates from 5V power supplies. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. Currently, there are 4 input lines present. In this case, the high level output current is set to -8mA. In the low level output current setting, 8mAis used. The operating temperature should be lower than 125°C. Temperatures above -40°Cshould be used. The minimal supply voltage is 4.5V. It supports the maximal supply voltage of 5.5V. It is possible to achieve 140MHz frequencies. D FLIP-FLOPis used as the logic IC in this D flip flop. A total of 2 functions are provided by this T flip flop. With 14 pins, it is equipped with a low power consumption.
SN74AHCT74DE4 Features
14 pins
5V power supplies
2 Functions
14 pin count
SN74AHCT74DE4 Applications
There are a lot of Texas Instruments SN74AHCT74DE4 Flip Flops applications.
- Balanced 24 mA output drivers
- Individual Asynchronous Resets
- Convert a momentary switch to a toggle switch
- Bus hold
- Frequency Dividers
- Synchronous counter
- Dynamic threshold performance
- QML qualified product
- Buffered Clock
- Patented noise
