SN74AHCT74DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 140MHz |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.008 A |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHCT74DG4 Overview
The package is in the form of SOIC. A total of 2elements are contained within it. There have been 14 terminations. It is powered by a voltage of 5V . AHCT/VHCT/VTis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 1bits are used in this part. In view of its reliability, this D flip flop is a good fit for TUBE. It runs on 5Vvolts of power. Optimal efficiency requires a supply voltage of 5V. This input has 1lines. A -8mAis set for the high level output current. There is 8mA output current at the low level. There should be a temperature below 125°Cduring operation. Operating temperatures should be above -40°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. It supports a maximum supply voltage of 5.5V volts. It is possible to achieve a frequency of 140MHz. D FLIP-FLOPis the logic IC it uses. As a result, it is equipped with 2 functions . It is equipped with 14 pins.
SN74AHCT74DG4 Features
14 pins
1 Bits
5V power supplies
2 Functions
14 pin count
SN74AHCT74DG4 Applications
There are a lot of Texas Instruments SN74AHCT74DG4 Flip Flops applications.
- Storage Registers
- Parallel data storage
- EMI reduction circuitry
- Data Synchronizers
- Power down protection
- Modulo – n – counter
- Memory
- Set-reset capability
- Latch
- Balanced 24 mA output drivers
