SN74AHCT74DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 140MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.008 A |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHCT74DRG4 Overview
It is packaged in the way of SOIC. D flip flop is included in the Tape & Reel (TR)package. A total of 2elements are contained within it. A total of 14 terminations have been made. Power is provided by a 5V supply. Electronic devices of this type belong to the AHCT/VHCT/VTfamily. It is mounted by the way of Surface Mount. 14pins are included in its design. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Flip flops designed with 1bits are used in this part. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It operates from 5V power supplies. The supply voltage should be maintained at 5V for high efficiency. The number of input lines is 1. It is set to -8mAfor the high level output current. It is set to 8mAfor low level output current. The operating temperature should be lower than 125°C. Operating temperatures should be above -40°C. The system operates with a minimum supply voltage of 4.5V. 5.5Vis the maximum supply voltage supported by it. This frequency can be achieved at 140MHz. This logic IC is D FLIP-FLOP. It is equipped with 2 functions . It has 14 pins.
SN74AHCT74DRG4 Features
Tape & Reel (TR) package
14 pins
1 Bits
5V power supplies
2 Functions
14 pin count
SN74AHCT74DRG4 Applications
There are a lot of Texas Instruments SN74AHCT74DRG4 Flip Flops applications.
- Counters
- Storage registers
- Functionally equivalent to the MC10/100EL29
- Single Up Count-Control Line
- Balanced Propagation Delays
- Circuit Design
- Asynchronous counter
- Frequency division
- Event Detectors
- ESCC
