SN74AHCT74MPWREP
| Parameters | |
|---|---|
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
SN74AHCT74MPWREP Overview
The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). The Cut Tape (CT)package contains it. The output it is configured with uses Differential. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. -55°C~125°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74AHCTseries FPGA. A frequency of 140MHzshould not be exceeded by its output. It consumes 2μA of quiescent 14terminations have occurred. If you search by 74AHCT74, you will find similar parts. An input voltage of 5Vpowers the D latch. A 2pFfarad input capacitance is provided by this T flip flop. The electronic device belongs to the AHCT/VHCT/VTfamily. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. Its flexibility is enhanced by 2 circuits. Considering the reliability of this T flip flop, it is well suited for TR. There are 5V power supplies attached to it. In order to achieve high efficiency, the supply voltage should be maintained at 5V. There are no output lines on the JK flip flop.
SN74AHCT74MPWREP Features
Cut Tape (CT) package
74AHCT series
14 pins
5V power supplies
SN74AHCT74MPWREP Applications
There are a lot of Texas Instruments SN74AHCT74MPWREP Flip Flops applications.
- Single Up Count-Control Line
- Count Modes
- Digital electronics systems
- Supports Live Insertion
- Balanced 24 mA output drivers
- Set-reset capability
- Automotive
- Individual Asynchronous Resets
- Bounce elimination switch
- Shift Registers
