Parameters |
Max I(ol) |
0.008 A |
Number of Bits per Element |
1 |
Max Propagation Delay @ V, Max CL |
11.4ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
2pF |
Number of Input Lines |
4 |
fmax-Min |
80 MHz |
Clock Edge Trigger Type |
Positive Edge |
Max Frequency@Nom-Sup |
65000000Hz |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
Series |
74AHCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
D-Type |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
5V |
Base Part Number |
74AHCT74 |
Function |
Set(Preset) and Reset |
Output Type |
Differential |
Max Output Current |
8mA |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
2 |
Load Capacitance |
50pF |
Output Current |
8mA |
Clock Frequency |
140MHz |
Propagation Delay |
13 ns |
Turn On Delay Time |
1 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
AND, D-Type, Flip-Flop |
Current - Quiescent (Iq) |
2μA |
Current - Output High, Low |
8mA 8mA |
SN74AHCT74PW Overview
The package is in the form of 14-TSSOP (0.173, 4.40mm Width). It is contained within the Tubepackage. Currently, the output is configured to use Differential. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at -40°C~125°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74AHCT series. You should not exceed 140MHzin its output frequency. As a result, it consumes 2μA quiescent current and is not affected by external forces. There have been 14 terminations. This D latch belongs to the family of 74AHCT74. Power is supplied from a voltage of 5V volts. Its input capacitance is 2pFfarads. A device of this type belongs to the family of AHCT/VHCT/VT. Electronic part Surface Mountis mounted in the way. The 14pins are designed into the board. This device's clock edge trigger type is Positive Edge. It is included in FF/Latches. In order to achieve its superior flexibility, 2 circuits are used. It operates from 5V power supplies. The supply voltage should be maintained at 5V for high efficiency. It offers maximum design flexibility with its output current of 8mA. As of now, there are 4input lines.
SN74AHCT74PW Features
Tube package
74AHCT series
14 pins
5V power supplies
SN74AHCT74PW Applications
There are a lot of Texas Instruments SN74AHCT74PW Flip Flops applications.
- Storage Registers
- Latch
- Latch-up performance
- Dynamic threshold performance
- Clock pulse
- Patented noise
- Bus hold
- Modulo – n – counter
- Buffered Clock
- High Performance Logic for test systems