SN74AHCT74QPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT74QPWRG4Q1 Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). Package Tape & Reel (TR)embeds it. Differentialis the output configured for it. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is at -40°C~125°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the Automotive, AEC-Q100, 74AHCT series. It should not exceed 140MHzin terms of its output frequency. This process consumes 2μA quiescents. There have been 14 terminations. It is a member of the 74AHCT74 family. A voltage of 5V is used to power it. Its input capacitance is 2pF farads. Devices in the AHCT/VHCT/VTfamily are electronic devices. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. In this device, the clock edge trigger type is Positive Edge. Despite its superior flexibility, it relies on 2 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for TR. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It operates with 1 output lines.
SN74AHCT74QPWRG4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74AHCT series
14 pins
SN74AHCT74QPWRG4Q1 Applications
There are a lot of Texas Instruments SN74AHCT74QPWRG4Q1 Flip Flops applications.
- Event Detectors
- Buffer registers
- Power down protection
- Circuit Design
- Consumer
- Shift Registers
- Supports Live Insertion
- Storage Registers
- ATE
- QML qualified product
