SN74AHCT74QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT74QPWRQ1 Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). Differentialis the output configured for it. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. Temperature is set to -40°C~125°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the Automotive, AEC-Q100, 74AHCT series. Its output frequency should not exceed 140MHz. During its operation, it consumes 2μA quiescent energy. 14terminations have occurred. This D latch belongs to the family of 74AHCT74. It is powered by a voltage of 5V . This T flip flop has a capacitance of 2pF farads at the input. It belongs to the family of electronic devices known as AHCT/VHCT/VT. There is an electronic part that is mounted in the way of Surface Mount. The 14pins are designed into the board. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Its superior flexibility is attributed to its use of 2 circuits. Considering its reliability, this T flip flop is well suited for TR. It runs on 5Vvolts of power. High efficiency requires the supply voltage to be maintained at 5V.
SN74AHCT74QPWRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74AHCT series
14 pins
5V power supplies
SN74AHCT74QPWRQ1 Applications
There are a lot of Texas Instruments SN74AHCT74QPWRQ1 Flip Flops applications.
- QML qualified product
- Count Modes
- Control circuits
- Pattern generators
- Clock pulse
- Load Control
- Differential Individual
- Memory
- 2 – Bit synchronous counter
- Computers
