SN74ALS1004DR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Gates |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS1004 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Propagation Delay | 7 ns |
| Family | ALS |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | 15mA 24mA |
| Logic Type | Inverter |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 7ns @ 5V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Power Supply Current-Max (ICC) | 12mA |
| Number of Output Lines | 6 |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS1004DR Overview
The part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Using Inverter logic, it functions. A voltage of 4.5V~5.5V is needed to ensure full function of the part. An extended operating temperature of 0°C~70°C degrees Celsius. There is Surface Mount mounting in Surface Mount. Output current is 15mA 24mA in the high and low states. There are several in the 74ALS series. Total terminations are 14. The part has 6 functions that significantly boost the user experience. As part of ALS, this chip is used. 74ALS1004 can be used to search for device variants. A total of 14 pins are injected into the part body. Many applications require the use of this logic device with its Surface Mount mounting. To find out what the functions of 14 pins are, please refer to their datasheets. The logic device in this example is a typical Gates. 50pF is the load capacitance of the part. A minimum voltage of 4.5V is required to supply the device. As soon as Vsup reaches 5.5V, the maximal supply voltage is achieved. The method TAPE AND REEL is packed into it. Datasheets indicate that this part requires 5V power supply. 24mA is the output current of the device.
SN74ALS1004DR Features
Inverter Logic Type
Operating Temperature: 0°C~70°C
ALS Family
Output Current: 24mA
SN74ALS1004DR Applications
There are a lot of Texas Instruments SN74ALS1004DR Gates and Inverters applications.
- Electrical tools
- Home theater
- Digital camera
- Urban rail vehicle
- Small ground power station
- Air conditioner
- Residual current/leakage current protection
- Electric grinding wheel
- Massager
- Communication
