SN74ALS109ADG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 34MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | AND, JK-Type |
| Current - Quiescent (Iq) | 4mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 4mA |
| fmax-Min | 34 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 34000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS109ADG4 Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. The package Tubecontains it. As configured, the output uses Differential. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at 0°C~70°C TA. This electronic flip flop is of type JK Type. The FPGA belongs to the 74ALS series. This D flip flop should not have a frequency greater than 34MHz. It consumes 4mA of quiescent Terminations are 16. The 74ALS109 family contains this object. The D flip flop is powered by a voltage of 5V . In terms of electronic devices, this device belongs to the ALSfamily of devices. It is mounted by the way of Surface Mount. It is designed with 16 pins. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. To achieve this superior flexibility, 2 circuits are used. The D latch runs on a voltage of 5V volts. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With a current output of 8mA , it offers maximum design flexibility.
SN74ALS109ADG4 Features
Tube package
74ALS series
16 pins
5V power supplies
SN74ALS109ADG4 Applications
There are a lot of Texas Instruments SN74ALS109ADG4 Flip Flops applications.
- Shift Registers
- Matched Rise and Fall
- Single Down Count-Control Line
- Circuit Design
- Set-reset capability
- Safety Clamp
- Divide a clock signal by 2 or 4
- ATE
- Instrumentation
- Frequency division
