SN74ALS109ANSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS109 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 34MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 4mA |
| Number of Input Lines | 5 |
| fmax-Min | 34 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 34000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS109ANSR Overview
The flip flop is packaged in 16-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). It is configured with Differentialas an output. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. 0°C~70°C TAis the operating temperature. The type of this D latch is JK Type. The 74ALSseries comprises this type of FPGA. It should not exceed 34MHzin terms of its output frequency. T flip flop consumes 4mA quiescent energy. A total of 16 terminations have been made. D latch belongs to the 74ALS109 family. It is powered from a supply voltage of 5V. Electronic devices of this type belong to the ALSfamily. It is mounted in the way of Surface Mount. This board is designed with 16pins on it. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Its flexibility is enhanced by 2 circuits. This D flip flop is well suited for TR based on its reliable performance. There are 5V power supplies attached to it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With an output current of 8mA, it is possible to design the device in any way you want. As of now, there are 5input lines.
SN74ALS109ANSR Features
Tape & Reel (TR) package
74ALS series
16 pins
5V power supplies
SN74ALS109ANSR Applications
There are a lot of Texas Instruments SN74ALS109ANSR Flip Flops applications.
- Digital electronics systems
- Buffer registers
- Instrumentation
- Shift Registers
- Event Detectors
- Balanced 24 mA output drivers
- Functionally equivalent to the MC10/100EL29
- Patented noise
- Modulo – n – counter
- Latch-up performance
