SN74ALS112AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 30MHz |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4.5mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 19ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Schmitt Trigger | No |
| Number of Input Lines | 5 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS112AD Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tubepackage. In the configuration, Differentialis used as the output. This trigger uses the value Negative Edge. There is an electronic component mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis considered to be the operating temperature. A flip flop of this type is classified as a JK Type. In this case, it is a type of FPGA belonging to the 74ALS series. Its output frequency should not exceed 30MHz. This process consumes 4.5mA quiescents. There are 16 terminations,The 74ALS112 family contains this object. It is powered by a voltage of 5V . A device of this type belongs to the family of ALS. Electronic part Surface Mountis mounted in the way. There are 16pins on it. There is a clock edge trigger type of Negative Edgeon this device. It is included in FF/Latches. 2 circuits are used to achieve its superior flexibility. The D latch operates on 5V volts. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 8mA . It has 5lines.
SN74ALS112AD Features
Tube package
74ALS series
16 pins
5V power supplies
SN74ALS112AD Applications
There are a lot of Texas Instruments SN74ALS112AD Flip Flops applications.
- QML qualified product
- Test & Measurement
- Modulo – n – counter
- Frequency division
- Memory
- Supports Live Insertion
- Registers
- Parallel data storage
- Safety Clamp
- Convert a momentary switch to a toggle switch
