SN74ALS112ADR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 30MHz |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4.5mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 19ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Number of Input Lines | 5 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS112ADR Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Differential. Negative Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at 0°C~70°C TA. Logic flip flops of this type are classified as JK Type. It is a type of FPGA belonging to the 74ALS series. Its output frequency should not exceed 30MHz Hz. This process consumes 4.5mA quiescents. It has been determined that there have been 16 terminations. D latch belongs to the 74ALS112 family. The power source is powered by 5V. This D flip flop belongs to the family of ALS. In this case, the electronic component is mounted in the way of Surface Mount. The 16pins are designed into the board. The clock edge trigger type for this device is Negative Edge. There is a base part number FF/Latchesfor the RS flip flops. 2 circuits are used to achieve its superior flexibility. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. There are 5V power supplies attached to it. If high efficiency is desired, the supply voltage should be kept at 5V. With an output current of 8mA, it is possible to design the device in any way you want. Currently, there are 5 lines of input.
SN74ALS112ADR Features
Tape & Reel (TR) package
74ALS series
16 pins
5V power supplies
SN74ALS112ADR Applications
There are a lot of Texas Instruments SN74ALS112ADR Flip Flops applications.
- Balanced 24 mA output drivers
- Synchronous counter
- Set-reset capability
- Computers
- Patented noise
- Data transfer
- Balanced Propagation Delays
- Bus hold
- Clock pulse
- Convert a momentary switch to a toggle switch
