SN74ALS112AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ALS112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 30MHz |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4.5mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 19ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Schmitt Trigger | No |
| Number of Input Lines | 5 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS112AN Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). It is included in the package Tube. Differentialis the output configured for it. The trigger it is configured with uses Negative Edge. There is an electrical part that is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. Currently, the operating temperature is 0°C~70°C TA. This electronic flip flop is of type JK Type. In terms of FPGAs, it belongs to the 74ALS series. It should not exceed 30MHzin terms of its output frequency. As a result, it consumes 4.5mA quiescent current and is not affected by external forces. There are 16 terminations,JK flip flop belongs to 74ALS112 family. It is powered by a voltage of 5V . In this case, the D flip flop belongs to the ALSfamily. It is mounted by the way of Through Hole. A total of 16pins are provided on this board. This device has the clock edge trigger type of Negative Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Its flexibility is enhanced by 2 circuits. An electrical current of 5V volts is applied to it. Optimal efficiency requires a supply voltage of 5V. The output current of 8mA makes it feature maximum design flexibility. Currently, there are 5 input lines present.
SN74ALS112AN Features
Tube package
74ALS series
16 pins
5V power supplies
SN74ALS112AN Applications
There are a lot of Texas Instruments SN74ALS112AN Flip Flops applications.
- Consumer
- Supports Live Insertion
- High Performance Logic for test systems
- Circuit Design
- Frequency Dividers
- Divide a clock signal by 2 or 4
- Single Down Count-Control Line
- ESCC
- Computers
- Asynchronous counter
